mirror of
https://github.com/theupriser/steamify-cachyos.git
synced 2026-10-03 17:41:58 +02:00
feat: HDMI refresh boost per display, with a Saved displays screen
Rates are saved per display (EDID ID) and loaded by the hotplug script for whichever display is connected. The item is on only while the connected display is boosted; unticking removes just that one. The app lists the saved displays and removes any of them (hdmi-forget).
This commit is contained in:
theupriser committed
1 parent
36d0a9d780
commit
4cc87aaea6
8 files changed
+293
-107
No files matched your search
+128
-69
@@ -1,7 +1,7 @@
|
||||
#!/bin/bash
|
||||
# "HDMI refresh boost" menu item, Steam Machine (Fremont) only: finds the
|
||||
# highest refresh rate the display runs at the desktop resolution over HDMI,
|
||||
# tests it live and keeps it with an EDID override that's only loaded while
|
||||
# tests it live and saves an EDID override per display, loaded only while
|
||||
# that display is connected (see hdmi_install_hotplug). Two things keep displays below what they can do:
|
||||
# - Monitors put their fast modes in an extra EDID block (HDMI Forum EEODB);
|
||||
# the pinned kernel (7.1.6) only reads the first extension. Newer kernels
|
||||
@@ -16,8 +16,11 @@
|
||||
HDMI_FW_DIR=/usr/lib/firmware/edid
|
||||
# Before 2.1.0 the override was on the kernel command line; only removed now.
|
||||
HDMI_INITRAMFS_CONF=/etc/mkinitcpio.conf.d/90-steamify-edid.conf
|
||||
# "<output> <display id>" per line: which display each EDID file is for.
|
||||
# The saved displays, one per line: <id> TAB <name> TAB <w>x<h> TAB <rates>.
|
||||
# Their EDIDs are $HDMI_FW_DIR/steamify-<id>.bin.
|
||||
HDMI_MAP=/etc/steamify/hdmi-edid.conf
|
||||
# Per output, the ID of the display whose EDID is loaded, or "reset".
|
||||
HDMI_RUN=/run/steamify-edid
|
||||
HDMI_HOTPLUG=/usr/local/bin/steamify-edid-hotplug
|
||||
HDMI_UNIT_NAME=steamify-edid.service
|
||||
HDMI_UNIT="/etc/systemd/system/$HDMI_UNIT_NAME"
|
||||
@@ -55,13 +58,25 @@ hdmi_cmdline_param() {
|
||||
hdmi_available() {
|
||||
# Stays available while on, so it can be turned off after the pin is gone.
|
||||
detect_valve_fremont || return 1
|
||||
hdmi_status || { pinned_kernel_installed && [[ -n "$(hdmi_connectors)" ]]; }
|
||||
# Saved displays too, so they can be removed without the pin.
|
||||
hdmi_status || [[ -n "$(hdmi_saved)" ]] || { pinned_kernel_installed && [[ -n "$(hdmi_connectors)" ]]; }
|
||||
}
|
||||
|
||||
hdmi_status() {
|
||||
# The command line: set up by an older version, re-applying moves it over.
|
||||
{ [[ -f "$HDMI_UNIT" ]] || [[ -n "$(hdmi_cmdline_param)" ]]; } &&
|
||||
compgen -G "$HDMI_FW_DIR/steamify-*.bin" >/dev/null
|
||||
# On = the connected display runs on its saved EDID. Another display on
|
||||
# the port is off, so ticking it sets that one up. The command line: set
|
||||
# up by an older version, re-applying moves it over.
|
||||
[[ -n "$(hdmi_active_ids)" ]] ||
|
||||
{ [[ -n "$(hdmi_cmdline_param)" ]] && compgen -G "$HDMI_FW_DIR/steamify-*.bin" >/dev/null; }
|
||||
}
|
||||
|
||||
hdmi_saved() { [[ -f "$HDMI_MAP" ]] && grep -v '^#' "$HDMI_MAP"; }
|
||||
|
||||
hdmi_active_ids() {
|
||||
# IDs of the connected displays whose saved EDID is loaded.
|
||||
local f
|
||||
for f in "$HDMI_RUN"/*; do [[ -f "$f" ]] && grep -vx reset "$f"; done
|
||||
return 0
|
||||
}
|
||||
|
||||
hdmi_edid_tool() {
|
||||
@@ -171,6 +186,11 @@ if cmd == 'blocks':
|
||||
print(nblocks(load(args[0])))
|
||||
elif cmd == 'id':
|
||||
print(load(args[0])[8:18].hex())
|
||||
elif cmd == 'name':
|
||||
e = load(args[0])
|
||||
for o in range(54, 126, 18):
|
||||
if e[o:o + 3] == b'\0\0\0' and e[o + 3] == 0xfc:
|
||||
print(e[o + 5:o + 18].split(b'\n')[0].decode('ascii', 'replace').strip())
|
||||
elif cmd == 'plan':
|
||||
e = load(args[0]); w, h, cur = int(args[1]), int(args[2]), float(args[3])
|
||||
lim, t = tmds_khz(e), shortest(e, w, h)
|
||||
@@ -351,29 +371,69 @@ hdmi_remove_boot_param() {
|
||||
esac
|
||||
}
|
||||
|
||||
hdmi_install_hotplug() {
|
||||
# The EDID file of an output is only loaded while the display it was
|
||||
# tested on is connected: a udev rule runs the script at every hotplug
|
||||
# (and a unit at boot, before the login manager). The script reads the
|
||||
# display's ID over DDC, which shows the real display even while an
|
||||
# override is loaded, and loads the file or resets to the display's own
|
||||
# EDID. Another display on that port gets its own EDID, and unplugging
|
||||
# resets it, so the next display never starts on the wrong one.
|
||||
local f out map=""
|
||||
for f in "$HDMI_FW_DIR"/steamify-*.bin; do
|
||||
hdmi_write_map() {
|
||||
# hdmi_write_map <lines>: the saved displays list.
|
||||
sudo mkdir -p "$(dirname "$HDMI_MAP")"
|
||||
{ printf '# Written by steamify: HDMI refresh boost, one display per line:\n'
|
||||
printf '# <id>\t<name>\t<w>x<h>\t<rates>\n'
|
||||
[[ -n "$1" ]] && printf '%s\n' "$1"; } | sudo tee "$HDMI_MAP" >/dev/null
|
||||
}
|
||||
|
||||
hdmi_save() {
|
||||
# hdmi_save <edid> <w>x<h> <rates>: keep an EDID for the display it was
|
||||
# built from (block 0 is the display's own, so is its ID), replacing
|
||||
# what was saved for that display before.
|
||||
local id name
|
||||
id="$(hdmi_edid_tool id "$1")" && [[ -n "$id" ]] || return 1
|
||||
name="$(hdmi_edid_tool name "$1")"
|
||||
sudo install -Dm644 "$1" "$HDMI_FW_DIR/steamify-$id.bin" || return 1
|
||||
hdmi_write_map "$(hdmi_saved | awk -F'\t' -v i="$id" '$1 != i'
|
||||
printf '%s\t%s\t%s\t%s' "$id" "${name:-HDMI display}" "$2" "$3")"
|
||||
}
|
||||
|
||||
hdmi_forget() {
|
||||
# hdmi_forget <id>|all: remove saved displays; the hotplug script puts
|
||||
# a connected one back on its own EDID, and goes when none are left.
|
||||
local rest=""
|
||||
if [[ "$1" == all ]]; then
|
||||
sudo rm -f "$HDMI_FW_DIR"/steamify-*.bin
|
||||
else
|
||||
rest="$(hdmi_saved | awk -F'\t' -v i="$1" '$1 != i')"
|
||||
sudo rm -f "$HDMI_FW_DIR/steamify-$1.bin"
|
||||
fi
|
||||
if [[ -z "$rest" ]]; then hdmi_remove_hotplug; return; fi
|
||||
hdmi_write_map "$rest"
|
||||
sudo systemctl restart "$HDMI_UNIT_NAME"
|
||||
}
|
||||
|
||||
hdmi_migrate() {
|
||||
# Setups before 2.1.0: steamify-<output>.bin on the kernel command line,
|
||||
# the display's ID and mode in the state file. Saved per display now.
|
||||
local f out
|
||||
local -a smode
|
||||
for f in "$HDMI_FW_DIR"/steamify-*-*.bin; do
|
||||
[[ -e "$f" ]] || continue
|
||||
out="${f##*/steamify-}"; out="${out%.bin}"
|
||||
map+="$out $(state_get hdmi "$out")"$'\n'
|
||||
read -ra smode <<< "$(state_get hdmi "$out-mode")"
|
||||
[[ ${#smode[@]} -ge 2 ]] && hdmi_save "$f" "${smode[0]}x${smode[1]}" "${smode[*]:2}"
|
||||
sudo rm -f "$f"
|
||||
done
|
||||
[[ -n "$map" ]] || return 1
|
||||
sudo mkdir -p "$(dirname "$HDMI_MAP")"
|
||||
printf '# Written by steamify: HDMI refresh boost, <output> <display id>.\n%s' "$map" |
|
||||
sudo tee "$HDMI_MAP" >/dev/null || return 1
|
||||
state_clear hdmi
|
||||
hdmi_remove_boot_param
|
||||
}
|
||||
|
||||
hdmi_install_hotplug() {
|
||||
# A saved EDID is only loaded while its display is connected: a udev
|
||||
# rule runs the script at every hotplug (and a unit at boot, before the
|
||||
# login manager). The script reads the display's ID over DDC, which
|
||||
# shows the real display even while an override is loaded, and loads
|
||||
# that display's file or resets to its own EDID. Unplugging resets too,
|
||||
# so the next display never starts on the wrong one.
|
||||
sudo tee "$HDMI_HOTPLUG" > /dev/null << 'EOF'
|
||||
#!/bin/bash
|
||||
# Steamify CachyOS, HDMI refresh boost: load an output's EDID override only
|
||||
# while the display it was made for is connected. Runs as root (debugfs).
|
||||
MAP=/etc/steamify/hdmi-edid.conf FW=/usr/lib/firmware/edid RUN=/run/steamify-edid
|
||||
# Steamify CachyOS, HDMI refresh boost: load a display's saved EDID only
|
||||
# while it is connected. Runs as root (debugfs).
|
||||
FW=/usr/lib/firmware/edid RUN=/run/steamify-edid
|
||||
modprobe i2c-dev 2>/dev/null
|
||||
mkdir -p "$RUN"
|
||||
# Hotplug events come in bursts, and the link needs a moment before DDC works.
|
||||
@@ -381,9 +441,7 @@ sleep 1
|
||||
for c in /sys/class/drm/card*-HDMI-A-*; do
|
||||
[ -e "$c" ] || continue
|
||||
out="${c##*/}"; out="${out#card*-}"
|
||||
want="$(awk -v o="$out" '$1 == o { print $2 }' "$MAP")"
|
||||
[ -n "$want" ] && [ -f "$FW/steamify-$out.bin" ] || continue
|
||||
new=reset
|
||||
new=reset id=""
|
||||
if [ "$(cat "$c/status")" = connected ]; then
|
||||
bus="$(basename "$(readlink -f "$c/ddc")")"
|
||||
for i in 1 2 3 4 5; do
|
||||
@@ -392,13 +450,13 @@ for c in /sys/class/drm/card*-HDMI-A-*; do
|
||||
[ ${#id} -eq 36 ] && break
|
||||
sleep 1
|
||||
done
|
||||
[ "${id:16}" = "$want" ] && new=override
|
||||
[ ${#id} -eq 36 ] && [ -f "$FW/steamify-${id:16}.bin" ] && new="${id:16}"
|
||||
fi
|
||||
[ "$(cat "$RUN/$out" 2>/dev/null || echo reset)" = "$new" ] && continue
|
||||
for d in /sys/kernel/debug/dri/*/"$out"; do [ -e "$d/edid_override" ] && break; done
|
||||
[ -e "$d/edid_override" ] || continue
|
||||
if [ "$new" = override ]; then cat "$FW/steamify-$out.bin" > "$d/edid_override"
|
||||
else printf reset > "$d/edid_override"; fi
|
||||
if [ "$new" = reset ]; then printf reset > "$d/edid_override"
|
||||
else cat "$FW/steamify-$new.bin" > "$d/edid_override"; fi
|
||||
# Before the hotplug below, whose own event runs this again.
|
||||
echo "$new" > "$RUN/$out"
|
||||
echo 1 > "$d/trigger_hotplug"
|
||||
@@ -432,6 +490,17 @@ EOF
|
||||
sudo systemctl restart "$HDMI_UNIT_NAME"
|
||||
}
|
||||
|
||||
hdmi_remove_hotplug() {
|
||||
local conn
|
||||
sudo systemctl disable "$HDMI_UNIT_NAME" >/dev/null 2>&1
|
||||
sudo rm -f "$HDMI_UDEV_RULE" "$HDMI_UNIT" "$HDMI_HOTPLUG" "$HDMI_MAP"
|
||||
sudo rm -rf "$HDMI_RUN"
|
||||
sudo systemctl daemon-reload
|
||||
sudo udevadm control --reload
|
||||
for conn in $(hdmi_connectors); do hdmi_override_live "$conn" reset 2>/dev/null; done
|
||||
return 0
|
||||
}
|
||||
|
||||
hdmi_tune() {
|
||||
# hdmi_tune <card-connector> <tmpdir>: find and confirm the highest rate
|
||||
# at the desktop resolution. Sets HDMI_RESULT to "<w> <h> <hz>..." (the
|
||||
@@ -570,6 +639,16 @@ hdmi_choose() {
|
||||
|
||||
hdmi_enable() {
|
||||
local -a HDMI_RESULTS=()
|
||||
if [[ -n "$(hdmi_cmdline_param)" ]]; then
|
||||
info "Moving the EDID override off the kernel command line, so it only applies to its display..."
|
||||
hdmi_migrate && hdmi_install_hotplug || { err "Moving it failed."; return 1; }
|
||||
ok "HDMI refresh boost now only applies to the display it was set up for."
|
||||
return 0
|
||||
fi
|
||||
if hdmi_status; then
|
||||
ok "Already set up for the connected display. Untick and tick it again to re-test."
|
||||
return 0
|
||||
fi
|
||||
if [[ "${BACKEND:-false}" == true && ${#HDMI_CHOICE[@]} -eq 0 ]]; then
|
||||
err "HDMI refresh boost needs you at the screen: pick and test the rates in the app first."
|
||||
return 1
|
||||
@@ -578,28 +657,10 @@ hdmi_enable() {
|
||||
err "Run this from the Plasma desktop: the test switches the display mode through KDE."
|
||||
return 1
|
||||
fi
|
||||
if hdmi_status; then
|
||||
local conn stale=false
|
||||
for conn in $(hdmi_connectors); do
|
||||
[[ -f "$HDMI_FW_DIR/steamify-${conn#card*-}.bin" ]] || continue
|
||||
[[ "$(state_get hdmi "${conn#card*-}")" == "$(hdmi_edid_tool id "/sys/class/drm/$conn/edid")" ]] || stale=true
|
||||
done
|
||||
if [[ "$stale" == false && -n "$(hdmi_cmdline_param)" ]]; then
|
||||
info "Moving the EDID override off the kernel command line, so it only applies to this display..."
|
||||
hdmi_remove_boot_param && hdmi_install_hotplug || { err "Moving it failed."; return 1; }
|
||||
ok "HDMI refresh boost now only applies to the display it was set up for."
|
||||
return 0
|
||||
fi
|
||||
if [[ "$stale" == false ]]; then
|
||||
ok "Already set up for the connected display(s). Untick and tick it again to re-test."
|
||||
return 0
|
||||
fi
|
||||
warn "Set up for another display; setting up the one connected now."
|
||||
hdmi_disable || return 1
|
||||
fi
|
||||
sudo pacman -S --needed --noconfirm i2c-tools python >/dev/null 2>&1 || { err "Installing i2c-tools failed."; return 1; }
|
||||
|
||||
local tmp conn out files=() rc=0 res
|
||||
local tmp conn out res saved=false rc=0
|
||||
local -a smode
|
||||
tmp="$(mktemp -d)"
|
||||
if [[ ${#HDMI_CHOICE[@]} -gt 0 ]]; then
|
||||
# Picked and tested in the app.
|
||||
@@ -611,34 +672,32 @@ hdmi_enable() {
|
||||
done
|
||||
fi
|
||||
for res in "${HDMI_RESULTS[@]}"; do
|
||||
out="${res%%|*}"
|
||||
sudo install -Dm644 "$tmp/$out.final" "$HDMI_FW_DIR/steamify-$out.bin" || { rc=1; continue; }
|
||||
state_set hdmi "$out" "$(hdmi_edid_tool id "$tmp/$out.orig")"
|
||||
state_set hdmi "$out-mode" "${res#*|}"
|
||||
files+=("$HDMI_FW_DIR/steamify-$out.bin")
|
||||
out="${res%%|*}"; read -ra smode <<< "${res#*|}"
|
||||
hdmi_save "$tmp/$out.final" "${smode[0]}x${smode[1]}" "${smode[*]:2}" && saved=true || rc=1
|
||||
done
|
||||
rm -rf "$tmp" "$HDMI_CACHE"
|
||||
[[ ${#files[@]} -gt 0 ]] || return $rc
|
||||
[[ "$saved" == true ]] || return $rc
|
||||
if ! hdmi_install_hotplug; then
|
||||
# Nothing half-done left behind; the live EDID lasts until a restart.
|
||||
hdmi_disable >/dev/null 2>&1
|
||||
hdmi_remove_hotplug
|
||||
err "Making it permanent failed; the display is back on its own EDID."
|
||||
return 1
|
||||
fi
|
||||
ok "HDMI refresh boost is set up for this display; another display gets its own settings."
|
||||
ok "HDMI refresh boost is saved for this display; other displays keep their own settings."
|
||||
return $rc
|
||||
}
|
||||
|
||||
hdmi_disable() {
|
||||
local f conn
|
||||
sudo systemctl disable "$HDMI_UNIT_NAME" >/dev/null 2>&1
|
||||
sudo rm -f "$HDMI_UDEV_RULE" "$HDMI_UNIT" "$HDMI_HOTPLUG" "$HDMI_MAP"
|
||||
sudo rm -rf /run/steamify-edid
|
||||
sudo systemctl daemon-reload
|
||||
sudo udevadm control --reload
|
||||
for f in "$HDMI_FW_DIR"/steamify-*.bin; do [[ -e "$f" ]] && sudo rm -f "$f"; done
|
||||
hdmi_remove_boot_param || return 1
|
||||
for conn in $(hdmi_connectors); do hdmi_override_live "$conn" reset 2>/dev/null; done
|
||||
state_clear hdmi
|
||||
ok "HDMI refresh boost removed; the display uses its own EDID again."
|
||||
# For the connected display; other saved displays stay (the app lists
|
||||
# them). Without the pinned kernel none may stay: newer kernels read the
|
||||
# EDID themselves.
|
||||
local id
|
||||
if [[ -n "$(hdmi_cmdline_param)" ]]; then
|
||||
hdmi_forget all; hdmi_remove_boot_param || return 1; state_clear hdmi
|
||||
elif [[ "${WANTED[kpin]:-1}" == 0 ]] || ! pinned_kernel_installed; then
|
||||
hdmi_forget all
|
||||
else
|
||||
for id in $(hdmi_active_ids); do hdmi_forget "$id"; done
|
||||
fi
|
||||
ok "HDMI refresh boost removed for the connected display; it uses its own EDID again."
|
||||
}
|
||||
Reference in new issue
Block a user