The power-off fix becomes an opt-out sub-option of Steam Machine
support. The kernel pin is no longer offered: an existing pin (and HDMI
refresh boost, which needs it) is unticked so a normal run removes it.
Components record a feature version on each successful run; installs
with an older version are ticked and updated, and new default
sub-options are ticked where their parent is on.
Kernels >= 7.2 keep the firmware's S4/S5 wake bit on GPIO pin 18, so the
Steam Machine starts again right after powering off. Steam Machine
support now builds a DKMS module (patches/steamify-fremont-poweroff.c)
that clears it before power-off, for every kernel. The kernel pin is no
longer ticked by default. Module sources and patches move to patches/,
embedded by the single-file build.
The item's switch becomes a Set up / Manage button. Manage lists the
saved displays, removes one with its Remove button, and sets up the
connected display when it has no saved rates.
Rates are saved per display (EDID ID) and loaded by the hotplug script
for whichever display is connected. The item is on only while the
connected display is boosted; unticking removes just that one. The app
lists the saved displays and removes any of them (hdmi-forget).
The EDID override moves off the kernel command line to a hotplug script
(boot unit + udev rule) that loads it only while the display it was
tested on is connected, identified over DDC; other displays get their
own EDID.
Steamify CachyOS on the desktop and in the launcher starts the newest app
(in Konsole the first time, while PySide6 still has to be installed); the
terminal menu is Steamify Terminal in the launcher. A shortcut from before
2.0.1 is ticked in the menu, so a normal run replaces it. steamify-app.sh
leaves the shortcut's launcher entry (same id) alone.
Set up… opens a screen with the display, its resolution and the rates on
offer. The display's own faster mode is switched to right away; the other
rates can each be tried live (wait for the picture, keep within 15 s or it
switches back) and ticked; Install installs the ticked ones through
apply --hdmi. All rates are loaded when the screen opens, so a try is only a
mode switch. Also fixes switching back to a rate like 59.97 Hz.
The app gets its texts and the same rules as the menu: unticking Steam
Machine support or the kernel pin unticks it. It can't be turned on from
the app, as each step needs someone at the keyboard to confirm the picture.
Both are sub-options of Steam Machine support now, shown only while it is
ticked. Unticking it unticks them; unticking the kernel pin unticks the
HDMI refresh boost, which only works with the pinned kernel.
Both are sub-options of Steam Machine support now, shown only while it is
ticked. Unticking it unticks them; unticking the kernel pin unticks the
HDMI refresh boost, which only works with the pinned kernel.
The pinned 7.1.6 kernel doesn't read the extra EDID block (HDMI Forum
EEODB) where monitors list their fast modes, and does no HDMI 2.1, so HDMI
displays often stay at 60 Hz. The new menu item reads the display's EDID
over DDC, calculates the highest rate that fits HDMI 2.0 at the desktop
resolution (rounded down to ten, plus the hundred below as a safe option),
tests each step live with a confirmation, and makes the confirmed ones
permanent through drm.edid_firmware (Limine, sdboot-manage or GRUB).
The pinned 7.1.6 kernel doesn't read the extra EDID block (HDMI Forum
EEODB) where monitors list their fast modes, and does no HDMI 2.1, so HDMI
displays often stay at 60 Hz. The new menu item reads the display's EDID
over DDC, calculates the highest rate that fits HDMI 2.0 at the desktop
resolution (rounded down to ten, plus the hundred below as a safe option),
tests each step live with a confirmation, and makes the confirmed ones
permanent through drm.edid_firmware (Limine, sdboot-manage or GRUB).
Pushes to feat/v2-ui publish the pre-release v2-ui-preview (never latest);
its steamify-app.sh downloads that build (STEAMIFY_RELEASE). The app's
1280x720 layout now stretches to the window's shape, so the bars reach the
edges; re-apply resets when back on the menu.
steamify-app.tar.gz (ui/, steamify.sh, lib/, icon) and its launcher
steamify-app.sh in every release: it installs to ~/.local/share/steamify/app,
installs PySide6 if needed, adds a launcher entry and starts the app.
STEAMIFY_BRANCH=<branch> runs a branch before it's released.
bios_enable split into bios_prepare (download, checksum, fwupd check) and
bios_flash; the terminal flow is unchanged. The app: check, warning 1,
warning 2 (type UPDATE, or hold A/OK for 5 seconds), flash, restart.
ui/steamify-ui (PySide6 + QML): menu, review, password, applying and done
screens from the design, scaled to the window. Controller via evdev,
keyboard, TV remote (cecd). steamify.sh --backend status|apply (lib/backend.sh)
drives the same components; sudo asks through an askpass helper.
HDMI-CEC runs before Steam Machine support, which installs steamos-manager,
so its configure-cecd unit couldn't be enabled. Link them from Steam Machine
support too.
With the kernel pin ticked, install 7.1.6-1 before the LED driver, so DKMS
builds it once. steamos-manager checks for cecd only at its start: order it
after cecd.
Valve's empty, password-less wallet, like SteamOS. The user's wallet is
moved aside and restored when single user mode is off; the single user
wallet is kept and reused next time.
Sub-option of Steam Machine support, ticked along with it: newer CachyOS
kernels make the Steam Machine reboot instead of shutting down. Packages
are kept in /var/cache/steamify/kernel and reinstalled from there; else
pacman's cache, the CachyOS archive or mirror, or PINNED_KERNEL_URL.
"boot into: gamescope (from the next boot)" instead of "turn off: Boot into the desktop instead of gaming mode"; also in the progress line and the Done overview.
- Menu row "Boot into: [gamescope] / desktop" under the conversion; gamescope is the default.
- Desktop: steamify-boot-desktop.service sets the autologin session to Plasma at every boot, before the login manager; switching back and forth keeps working.
- VERSION 0.10.0.
When a restart is needed, q asks with yes as the default; n goes back to the menu and the next q asks again. Ctrl+C quits without restarting; scripted input that runs out never restarts.
The DKMS override was written to /etc/dkms before dkms was installed, when that folder doesn't exist yet: the write failed silently and other kernels (e.g. LTS) built against the running one and failed. Create the folder first and stop on a failed write. VERSION 0.9.1.
- 10-second countdown after the wizard ends (Enter closes right away); after an error it waits for Enter.
- pipefail, so a failed download counts as an error.
- setup-gamescope-boot.sh renamed to steamify.sh; all references updated.
- Releases publish the bundle as steamify.sh and, for older install commands, setup-gamescope-boot.sh.
- The Steamify shortcut runs steamify.sh.
All URLs point to github.com/theupriser/steamify-cachyos (the old ones redirect). The script and internal names (state dir, shortcut files) keep their names so old download URLs and existing installs keep working.
theupriser