feat: on a supported NVIDIA card the SteamOS conversion replaces Gaming on NVIDIA

The conversion also sets up what Gaming on NVIDIA did there (kernel parameters, early modules, suspend memory, 32-bit libraries). Gaming on NVIDIA is only offered on older NVIDIA cards, or while it is on.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KkpbsMw4rQyBsxDG6ebHK2

CHANGELOG.md

@@ -5,6 +5,15 @@ All notable changes, per version and per commit. Versions follow
 `steamify.sh`. Versions before 0.7.0 were numbered afterwards,
 one per merged pull request.
 
+## 2.11.2 - 2026-10-13
+
+- **feat: the SteamOS conversion is offered on NVIDIA PCs again (GTX 16 / RTX 20 series or newer: Turing and later, the cards NVIDIA's open kernel driver supports): it builds and installs a patched gamescope from [steamify-gamescope-nvidia](https://github.com/theupriser/steamify-gamescope-nvidia) (GBM-allocated scan-out buffers, NVIDIA's corrupted gaming-mode picture, gamescope#2309; a few minutes to build) and sets `gamescope_drm_gbm_scanout=1` for the session (`lib/gamescope-nvidia.sh`). On those cards it replaces "Gaming on NVIDIA" (kernel parameters, early modules, suspend memory and the 32-bit libraries come with it); "Gaming on NVIDIA" is only offered on older NVIDIA cards, or while it is on (turn it off or swap it for the conversion; the two exclude each other); single user mode works with either. Tested on an RTX 5080 (driver 615.78.08): Steam's gaming UI is clean with it and shows artifacts without. The package is pinned to one gamescope release: updating it is not automatic yet**
+
+- **feat: "Gaming on NVIDIA" also keeps video memory over suspend (`NVreg_PreserveVideoMemoryAllocations=1` in `/etc/modprobe.d/90-steamify-nvidia.conf`, the initramfs is rebuilt), enables `nvidia-suspend`/`nvidia-resume`/`nvidia-hibernate`, and installs `lib32-nvidia-utils` and `lib32-libxkbcommon` (32-bit games, the 32-bit MangoHud preload) on a supported card; off removes only what Steamify added. Untested on hardware yet**
+
+## 2.11.1 - 2026-10-02
+
+- `d70aeb8` **docs: new README screenshots of the app (2.11 menu) on a Steam Machine and on an NVIDIA PC, and the README names the opt-in "Start Steam silently in desktop mode" and the icons as an option of the conversion**
 ## 2.11.0 - 2026-10-01
 
 - `2e51d1d`, `3494924`, `fbdad5a`, `079e725`, `188799e` **feat: "Start Steam silently" sub-option: under the SteamOS conversion (`silent`, opt-in now: it was always on before; an existing one is moved from its systemd unit to the autostart entry by the "update") and under Gaming on NVIDIA (`nvsilent`, opt-in, not together with Big Picture); the SteamOS one is called "Start Steam silently in desktop mode" and is always shown, also on a Steam Machine; it is Steam's own autostart entry (`~/.config/autostart/steam.desktop`), so Steam's setting "Run Steam when my computer starts" follows it**

README.md

@@ -27,6 +27,10 @@ Steam Machine.
    on the desktop too.
    - **Boot into: gamescope / desktop** - where the PC starts. Gaming mode is
      the default.
+   - **Start Steam silently in desktop mode** (off by default) - Steam starts
+     at login on the desktop, in the tray without a window. It is Steam's own
+     autostart entry, so Steam's setting "Run Steam when my computer starts"
+     follows it (the Linux Steam client has no silent option of its own).
    - Steam's **System** settings show the SteamOS release Steamify follows
      as OS Version (e.g. `steamos-3.9`), `steam-machine` as OS Codename and
      Steamify's version as OS Variant. The OS name stays CachyOS
@@ -40,7 +44,7 @@ Steam Machine.
 2. **SteamOS theme** - the Vapor look of SteamOS for the desktop, with
    **Add to Steam** in right-click menus
    ([details](TECHNICAL.md#steamos-desktop-look)).
-3. **Steam Deck/Machine icons** - Steam Deck button icons in gaming mode.
+3. **Steam Deck/Machine icons** - Steam Deck button icons in gaming mode (an option of the SteamOS conversion).
 4. **Single user mode** - like SteamOS: never a login or lock screen, and no
    KDE wallet password prompts (e.g. from Brave). Typing a password with a
    controller is no fun

TECHNICAL.md

@@ -238,10 +238,25 @@ no fix known). The kernel parameters `nvidia-drm.modeset=1`/`fbdev=1` and loadin
 window straight to the display. What does work on an RTX 5080: Steam's Big Picture (`steam -gamepadui`) as a normal window of
 the Plasma desktop session, smooth and clean.
 
+Since 2.11.2 there is a second way: gamescope with GBM-allocated scan-out buffers (`lib/gamescope-nvidia.sh`). On an RTX 5080
+(driver 615.78.08, 3440x1440@175) Steam's gaming UI in gamescope's DRM session is clean with it and shows artifacts everywhere
+without. The patch is nine commits of [farnoy/gamescope](https://github.com/farnoy/gamescope) (`nvidia-gbm-wayland`), kept in
+[steamify-gamescope-nvidia](https://github.com/theupriser/steamify-gamescope-nvidia) with its PKGBUILD; `gsn_install_package` clones
+that repository, builds the package as the user (`makepkg -sf`) and installs it with `pacman -U --ask 4` (the package provides and
+conflicts with `gamescope`). It is opt-in inside gamescope: `gamescope_drm_gbm_scanout=1` in
+`~/.config/gamescope-session/environment` and `~/.config/environment.d/99-steamify-gamescope-nvidia.conf`. The SteamOS conversion
+(`gaming_enable`) does this on a supported card (`nvidia_supported`), together with what "Gaming on NVIDIA" sets up there (the kernel
+parameters, the early modules, suspend memory, the 32-bit libraries: `nvidia_kernel_enable`, `nvidia_extras_enable`). So on a
+supported card the conversion replaces "Gaming on NVIDIA": that one is only offered on older NVIDIA cards, or while it is already on
+(to turn it off, or swap it for the conversion; the two exclude each other: `toggle_component`, `backend.sh`, `AppState.qml`).
+Single user mode works with either. Turning the conversion off removes the setting and those settings, and keeps the packages. The package is pinned to the gamescope release the patch was made for
+(`UPSTREAM_VERSION` in that repository): pacman does not update it, and Steamify does not rebuild it yet.
+
 So with an NVIDIA GPU (PCI vendor 0x10de, display class, its driver providing `nvidia_drm`: `nvidia_present`) the SteamOS
-conversion (`gaming`, and its options `boot`, `single`, `glyphs`) isn't offered, unless it is already on (so it can be turned
-off). `nvidia` ("Gaming on NVIDIA", `lib/nvidia.sh`) takes its place, hidden while the conversion is on (both would start
-Steam at login): it installs `steam` when missing (recorded in state `nvidia`, removed again only then) and enables the user
+conversion (`gaming`, and its options `boot`, `single`, `glyphs`) is only offered on a supported card (GTX 16 / RTX 20 series or newer, Turing and later,
+`nvidia_supported`) with the patched gamescope described below, or when it is already on (so it can be turned off).
+`nvidia` ("Gaming on NVIDIA", `lib/nvidia.sh`) is for older NVIDIA cards (and for PCs where it is already on), and excludes the
+conversion (both would start Steam at login): it installs `steam` when missing (recorded in state `nvidia`, removed again only then) and enables the user
 unit `steamify-steam-autostart.service` (`services/`, `ExecStart=/usr/bin/steam @ARGS@`, Plasma only). Its sub-option
 `bigpicture` ("Steam starts in Big Picture", ticked along with it) rewrites the unit with `-gamepadui` and sets
 `ksmserverrc [General] loginMode=emptySession` (`kset`, undone with `krevert bigpicture`), so windows of the last session
@@ -572,6 +587,7 @@ immediately, which can turn into a loop - see
 | `lib/update-notifier.sh` | Update notifications: the notifier from `patches/` and its user timer |
 | `lib/first-login.sh` | `--defaults` without a session (the Steam Machine ISO's installer): the one-time first-login step that sets up single user's launcher on Plasma's new layout and opens the app |
 | `lib/controllers.sh` | Extended controller support: Xbox wireless dongle (xone) and Xbox Bluetooth (xpadneo) from the CachyOS repo |
+| `lib/gamescope-nvidia.sh` | gamescope on NVIDIA: builds and installs the patched gamescope (GBM scan-out) from steamify-gamescope-nvidia and sets `gamescope_drm_gbm_scanout=1` for the SteamOS conversion |
 | `lib/nvidia.sh` | Gaming on NVIDIA: Steam on the desktop, started at login, optionally in Big Picture (replaces the SteamOS conversion there) |
 | `lib/vram-booster.sh` | VRAM booster (`dmemcg-booster`, `plasma-foreground-booster`) |
 | `services/` | The systemd units the scripts install (`service_file`, `@KEY@` placeholders); see its README |

lib/backend.sh

@@ -147,10 +147,15 @@ backend_apply() {
         for id in "${want[@]}"; do [[ "$id" == "$c" ]] && WANTED[$c]=1; done
     done
     # The same rules as the menu's toggles.
-    # (Single user mode only needs the conversion where it is offered: not on NVIDIA PCs.)
-    [[ "${WANTED[single]:-0}" == 1 ]] && component_available gaming && WANTED[gaming]=1
+    # (Single user mode only needs the conversion where it is offered: not on NVIDIA PCs, where it works without it.)
+    [[ "${WANTED[single]:-0}" == 1 ]] && component_available gaming && ! nvidia_present && WANTED[gaming]=1
+    # On NVIDIA the conversion and "Gaming on NVIDIA" exclude each other: the one that is not on yet wins.
+    if nvidia_present && [[ "${WANTED[gaming]:-0}" == 1 && "${WANTED[nvidia]:-0}" == 1 ]]; then
+        if [[ "${CURRENT[gaming]:-0}" == 1 ]]; then WANTED[gaming]=0; WANTED[boot]=0; WANTED[silent]=0; WANTED[glyphs]=0
+        else WANTED[nvidia]=0; WANTED[bigpicture]=0; WANTED[nvsilent]=0; fi
+    fi
     if component_available gaming; then
-        [[ "${WANTED[gaming]:-0}" == 0 ]] && { WANTED[single]=0; WANTED[boot]=0; }
+        [[ "${WANTED[gaming]:-0}" == 0 ]] && { nvidia_present || WANTED[single]=0; WANTED[boot]=0; }
     else
         WANTED[boot]=0
     fi

lib/gamescope-nvidia.sh

@@ -0,0 +1,80 @@
+#!/bin/bash
+# gamescope's own gaming mode on NVIDIA: a patched gamescope that allocates its scan-out buffers with GBM, which cures
+# the corrupted picture (https://github.com/ValveSoftware/gamescope/issues/2309). The patch and the build recipe live in
+# https://github.com/theupriser/steamify-gamescope-nvidia; the package `steamify-gamescope-nvidia` is built here, on the PC,
+# and replaces `gamescope` (it provides it). The patch is opt-in: gamescope reads `gamescope_drm_gbm_scanout=1` from its
+# environment, which is set for the gaming session (gamescope-session's environment file, and environment.d).
+# Used by the SteamOS conversion (`gaming_enable`/`gaming_disable`) on a supported NVIDIA card (`nvidia_supported`):
+# GTX 16 / RTX 20 series or newer (Turing and later, what NVIDIA's open kernel driver supports).
+# Sourced by steamify.sh; not meant to be run on its own.
+
+GSN_PKG=steamify-gamescope-nvidia
+GSN_REPO=${GSN_REPO:-https://github.com/theupriser/steamify-gamescope-nvidia.git}
+GSN_ENV_LINE='gamescope_drm_gbm_scanout=1'
+GSN_ENV_D="${GSN_ENV_D:-$HOME/.config/environment.d/99-steamify-gamescope-nvidia.conf}"
+GSN_SESSION_ENV="${GSN_SESSION_ENV:-$HOME/.config/gamescope-session/environment}"
+
+gsn_package_installed() { pacman -Q "$GSN_PKG" >/dev/null 2>&1; }
+
+gsn_env_set() { [[ -f "$GSN_ENV_D" ]] && grep -qsx "$GSN_ENV_LINE" "$GSN_SESSION_ENV"; }
+
+gsn_status() { gsn_package_installed && gsn_env_set; }
+
+gsn_install_package() {
+    # Builds the package from the repo (makepkg runs as the user, never as root) and installs it. The build needs a few
+    # minutes: gamescope compiles from source. --ask 4 lets pacman replace the stock gamescope it conflicts with.
+    gsn_package_installed && return 0
+    info "Building the patched gamescope for NVIDIA (a few minutes)..."
+    sudo pacman -S --needed --noconfirm base-devel git || { err "Installing the build tools failed."; return 1; }
+    local dir pkg
+    dir="$(mktemp -d)" || return 1
+    if ! git clone --depth 1 "$GSN_REPO" "$dir/src"; then
+        err "Couldn't download $GSN_REPO."
+        rm -rf "$dir"; return 1
+    fi
+    if ! (cd "$dir/src" && makepkg -sf --noconfirm --nocheck); then
+        err "Building the patched gamescope failed (see above). The stock gamescope stays."
+        rm -rf "$dir"; return 1
+    fi
+    pkg="$(ls "$dir"/src/"$GSN_PKG"-*.pkg.tar.* 2>/dev/null | grep -v -- '-debug-' | head -1)"
+    if [[ -z "$pkg" ]] || ! sudo pacman -U --noconfirm --ask 4 "$pkg"; then
+        err "Installing the patched gamescope failed. The stock gamescope stays."
+        rm -rf "$dir"; return 1
+    fi
+    rm -rf "$dir"
+    ok "Patched gamescope installed."
+}
+
+gsn_env_enable() {
+    mkdir -p "$(dirname "$GSN_ENV_D")" "$(dirname "$GSN_SESSION_ENV")"
+    echo "$GSN_ENV_LINE" > "$GSN_ENV_D"
+    touch "$GSN_SESSION_ENV"
+    grep -qsx "$GSN_ENV_LINE" "$GSN_SESSION_ENV" || echo "$GSN_ENV_LINE" >> "$GSN_SESSION_ENV"
+}
+
+gsn_env_disable() {
+    rm -f "$GSN_ENV_D"
+    [[ -f "$GSN_SESSION_ENV" ]] && sed -i "/^${GSN_ENV_LINE}\$/d" "$GSN_SESSION_ENV"
+    return 0
+}
+
+gsn_enable() {
+    # Only on a supported NVIDIA card; elsewhere the stock gamescope is right.
+    nvidia_supported || return 0
+    # What NVIDIA's DRM stack wants (lib/nvidia.sh): modeset/fbdev on the kernel command line, the modules in the
+    # initramfs, video memory kept over suspend, the 32-bit libraries. Takes effect at the next boot, like the session.
+    nvidia_kernel_enable || return 1
+    nvidia_extras_enable || return 1
+    gsn_install_package || return 1
+    gsn_env_enable
+    ok "gamescope draws NVIDIA's picture through GBM (gamescope_drm_gbm_scanout=1) from the next gaming mode start."
+}
+
+gsn_disable() {
+    # The setting goes, and what nvidia_*_enable added; the packages stay (patched gamescope, 32-bit libraries), like
+    # the other packages of the conversion (steam, gamescope-session-cachyos).
+    gsn_env_disable
+    nvidia_supported || return 0
+    nvidia_extras_disable
+    nvidia_kernel_disable
+}

lib/login-manager.sh

@@ -94,6 +94,8 @@ gaming_enable() {
     # LOGIN_MANAGER (sddm with single user, else plasmalogin) is set by the
     # menu. Re-running with the other value switches over cleanly.
     install_required_packages || return 1
+    # NVIDIA: gamescope's picture is corrupted unless it is the patched one (no-op elsewhere).
+    gsn_enable || return 1
     case "$LOGIN_MANAGER" in
         sddm)
             switch_to_sddm || return 1
@@ -122,6 +124,7 @@ gaming_disable() {
     switch_to_plasmalogin
     remove_desktop_shortcut
     steam_disable
+    gsn_disable
     krevert gaming
     os_name_disable
     ok "The PC boots to the normal login screen again (from the next boot)."

lib/menu.sh

@@ -26,7 +26,7 @@ NO_PRESELECT=(boot silent nvsilent cec kpin hdmi extended_controller_support)
 # FEATURE_BASELINE.
 FEATURE_BASELINE=2.1.0
 declare -A FEATURE_VERSION=(
-    [gaming]=2.9.0 [boot]=2.1.0 [silent]=2.11.0 [nvidia]=2.10.0 [bigpicture]=2.10.0 [nvsilent]=2.11.0 [theme]=2.1.0 [glyphs]=2.1.0 [single]=2.1.0
+    [gaming]=2.9.0 [boot]=2.1.0 [silent]=2.11.0 [nvidia]=2.11.2 [bigpicture]=2.10.0 [nvsilent]=2.11.0 [theme]=2.1.0 [glyphs]=2.1.0 [single]=2.1.0
     [launcher]=2.1.0 [cec]=2.7.0 [machine]=2.9.0 [poweroff]=2.2.0 [vram]=2.3.0 [notify]=2.5.0 [steamgame]=2.5.1 [extended_controller_support]=2.10.0
     [kpin]=2.1.0 [hdmi]=2.1.0
 )
@@ -57,9 +57,10 @@ declare -A CURRENT WANTED
 
 component_available() {
     case "$1" in
-        # gamescope's own session is broken on NVIDIA: the conversion is replaced by "Gaming on NVIDIA" there (shown
-        # anyway when it's already on, so it can be turned off).
-        gaming|boot|silent|glyphs) ! nvidia_present || gaming_status ;;
+        # gamescope's own session shows a corrupted picture on NVIDIA unless it is the patched one (lib/gamescope-nvidia.sh,
+        # installed with the conversion on a supported card); "Gaming on NVIDIA" is the alternative there. Older NVIDIA
+        # cards only get the alternative (the conversion is shown anyway when it's already on, so it can be turned off).
+        gaming|boot|silent|glyphs) ! nvidia_present || gaming_status || nvidia_supported ;;
         nvidia) nvidia_available ;;
         bigpicture|nvsilent) bigpicture_available ;;
         machine|poweroff) machine_available ;;
@@ -297,8 +298,8 @@ toggle_component() {
     WANTED[$c]=$(( 1 - WANTED[$c] ))
     # Single user mode only makes sense on top of the SteamOS conversion.
     # (On NVIDIA the conversion isn't offered: single user mode logs in by itself, see lib/single-user.sh.)
-    if [[ "$c" == single && "${WANTED[single]}" == 1 ]] && component_available gaming; then WANTED[gaming]=1; fi
-    if [[ "$c" == gaming && "${WANTED[gaming]}" == 0 ]]; then WANTED[single]=0; WANTED[boot]=0; fi
+    if [[ "$c" == single && "${WANTED[single]}" == 1 ]] && component_available gaming && ! nvidia_present; then WANTED[gaming]=1; fi
+    if [[ "$c" == gaming && "${WANTED[gaming]}" == 0 ]]; then nvidia_present || WANTED[single]=0; WANTED[boot]=0; fi
     # Where to boot to is part of the conversion, too.
     if [[ "$c" == boot && "${WANTED[boot]}" == 1 ]]; then WANTED[gaming]=1; fi
     # Big Picture is opt-out: ticked along with "Gaming on NVIDIA".
@@ -310,6 +311,15 @@ toggle_component() {
     if [[ "$c" == gaming && "${WANTED[gaming]}" == 0 ]]; then WANTED[silent]=0; WANTED[glyphs]=0; fi
     if [[ "$c" == silent && "${WANTED[silent]}" == 1 ]]; then WANTED[gaming]=1; fi
     if [[ "$c" == glyphs && "${WANTED[glyphs]}" == 1 ]]; then WANTED[gaming]=1; fi
+    # On NVIDIA the SteamOS conversion and "Gaming on NVIDIA" exclude each other (both would start Steam at login);
+    # single user mode works with either.
+    if nvidia_present; then
+        if [[ "$c" == nvidia && "${WANTED[nvidia]}" == 1 ]]; then
+            WANTED[gaming]=0; WANTED[boot]=0; WANTED[silent]=0; WANTED[glyphs]=0
+        elif [[ "$c" =~ ^(gaming|boot|silent|glyphs)$ && "${WANTED[$c]}" == 1 && "${WANTED[gaming]}" == 1 ]]; then
+            WANTED[nvidia]=0; WANTED[bigpicture]=0; WANTED[nvsilent]=0
+        fi
+    fi
     # The power-off fix is opt-out: ticked along with Steam Machine support.
     if [[ "$c" == machine ]]; then WANTED[poweroff]=${WANTED[machine]}; fi
     if [[ "$c" == poweroff && "${WANTED[poweroff]}" == 1 ]]; then WANTED[machine]=1; fi

lib/nvidia.sh

@@ -13,6 +13,11 @@ NVIDIA_INITRAMFS_CONF=${NVIDIA_INITRAMFS_CONF:-/etc/mkinitcpio.conf.d/90-steamif
 # The script and pacman hook that keep the initramfs file right at every kernel change.
 NVIDIA_SCRIPT=${NVIDIA_SCRIPT:-/usr/local/libexec/steamify-nvidia-initramfs}
 NVIDIA_HOOK=${NVIDIA_HOOK:-/etc/pacman.d/hooks/85-steamify-nvidia-initramfs.hook}
+# Keeps video memory over suspend (with the nvidia-suspend/resume services).
+NVIDIA_MODPROBE=${NVIDIA_MODPROBE:-/etc/modprobe.d/90-steamify-nvidia.conf}
+NVIDIA_SLEEP_UNITS="nvidia-suspend.service nvidia-resume.service nvidia-hibernate.service"
+# 32-bit parts Steam games and the 32-bit MangoHud preload need.
+NVIDIA_LIB32_PKGS="lib32-nvidia-utils lib32-libxkbcommon"
 # The running kernel's command line; the tests point this at a file.
 NVIDIA_CMDLINE=${NVIDIA_CMDLINE:-/proc/cmdline}
 # The DRM devices in sysfs; the tests point this at a fake tree.
@@ -32,9 +37,11 @@ nvidia_present() {
     return 1
 }
 
-# Shown on NVIDIA PCs, unless the SteamOS conversion is already on there (it
-# has to be turned off first: both would start Steam at login).
-nvidia_available() { nvidia_present && ! gaming_status 2>/dev/null; }
+# The SteamOS conversion with the patched gamescope (lib/gamescope-nvidia.sh) replaces this on a supported card, so
+# this is for older NVIDIA cards, and for a PC where it is already on (so it can be turned off, or swapped for the
+# conversion). It and the conversion exclude each other (both would start Steam at login): the menu unticks one when
+# the other is ticked.
+nvidia_available() { nvidia_present && { ! nvidia_supported || nvidia_status; }; }
 bigpicture_available() { nvidia_available; }
 
 nvidia_status() {
@@ -62,6 +69,7 @@ nvidia_enable() {
     nvidia_write_unit "$unit_args" || return 1
     user_systemctl enable "$NVIDIA_UNIT" >/dev/null 2>&1 || { err "Enabling $NVIDIA_UNIT failed."; return 1; }
     nvidia_kernel_enable || return 1
+    nvidia_extras_enable || return 1
     ok "Steam starts at your next login."
 }
 
@@ -70,13 +78,19 @@ nvidia_disable() {
     user_systemctl disable --now "$NVIDIA_UNIT" >/dev/null 2>&1
     rm -f "$unit"
     user_systemctl daemon-reload
+    # Swapped for the SteamOS conversion (turned on first, in the same run): it needs the same settings, they stay.
+    gaming_status 2>/dev/null || nvidia_extras_disable
     pkgs="$(state_get nvidia installed_pkgs)"
+    if gaming_status 2>/dev/null; then
+        local p; pkgs=" $pkgs "
+        for p in $NVIDIA_LIB32_PKGS; do pkgs="${pkgs// $p / }"; done
+    fi
     # Only what Steamify installed; games and the Steam folder stay.
     # shellcheck disable=SC2086 # a list of package names
     [[ -n "$pkgs" ]] && sudo pacman -Rns --noconfirm $pkgs >/dev/null 2>&1
     state_clear nvidia
     krevert bigpicture
-    nvidia_kernel_disable
+    gaming_status 2>/dev/null || nvidia_kernel_disable
     ok "Steam no longer starts at login."
 }
 
@@ -118,7 +132,7 @@ nvsilent_disable() {
 
 nvidia_supported() {
     # A supported NVIDIA GPU: PCI vendor 0x10de, display class, its kernel
-    # driver installed, and not older than the RTX 20 series, decided like the
+    # driver installed, and not older than Turing (GTX 16 / RTX 20 series: the cards NVIDIA's open kernel driver supports), decided like the
     # VRAM booster does (vram_nvidia_legacy_id: chwd's legacy card lists, every
     # other card runs NVIDIA's open modules). Older cards are left alone.
     local d
@@ -254,6 +268,48 @@ nvidia_kernel_enable() {
     return 0
 }
 
+nvidia_extras_enable() {
+    # Video memory kept over sleep, the matching services and the 32-bit libraries (a supported card only).
+    nvidia_supported || return 0
+    local pkg u units="" prev missing=()
+    if [[ ! -f "$NVIDIA_MODPROBE" ]]; then
+        info "Keeping video memory over suspend (NVreg_PreserveVideoMemoryAllocations=1)..."
+        printf '%s\n' '# Added by Steamify (Gaming on NVIDIA)' 'options nvidia NVreg_PreserveVideoMemoryAllocations=1' |
+            sudo tee "$NVIDIA_MODPROBE" >/dev/null || { err "Writing $NVIDIA_MODPROBE failed."; return 1; }
+        # The NVIDIA modules load from the initramfs, which carries modprobe.d.
+        nvidia_rebuild_boot || warn "Rebuilding the initramfs failed: the suspend setting applies once it is rebuilt."
+    fi
+    for u in $NVIDIA_SLEEP_UNITS; do
+        systemctl is-enabled -q "$u" 2>/dev/null && continue
+        sudo systemctl enable "$u" >/dev/null 2>&1 && units+="${units:+ }$u"
+    done
+    if [[ -n "$units" ]]; then
+        prev="$(state_get nvidia enabled_units)"
+        state_set nvidia enabled_units "${prev:+$prev }$units"
+    fi
+    for pkg in $NVIDIA_LIB32_PKGS; do pacman -Q "$pkg" >/dev/null 2>&1 || missing+=("$pkg"); done
+    if [[ ${#missing[@]} -gt 0 ]]; then
+        info "Installing the 32-bit libraries games need: ${missing[*]}"
+        if sudo pacman -S --needed --noconfirm "${missing[@]}"; then
+            prev="$(state_get nvidia installed_pkgs)"
+            state_set nvidia installed_pkgs "${prev:+$prev }${missing[*]}"
+        else
+            warn "Installing ${missing[*]} failed (is [multilib] enabled in /etc/pacman.conf?): 32-bit games may not start."
+        fi
+    fi
+    return 0
+}
+
+nvidia_extras_disable() {
+    # Only what Steamify enabled; the 32-bit packages go with installed_pkgs.
+    local u
+    for u in $(state_get nvidia enabled_units); do sudo systemctl disable "$u" >/dev/null 2>&1; done
+    if [[ -f "$NVIDIA_MODPROBE" ]]; then
+        sudo rm -f "$NVIDIA_MODPROBE"
+        nvidia_rebuild_boot || true
+    fi
+}
+
 nvidia_kernel_disable() {
     local f changed=0; f="$(nvidia_boot_file)"
     if [[ -n "$f" ]] && grep -q "$NVIDIA_PARAMS" "$f" 2>/dev/null; then

patches/README.md

@@ -16,3 +16,4 @@ read and reviewed on their own. `lib/*.sh` reads them with `patch_file
 | `steamify-os-release.sh`, `steamify-os-release.hook` | `lib/login-manager.sh` (SteamOS conversion) | What Steam's System settings show besides the OS name (which stays CachyOS's): `VERSION_ID=steamos-X.Y`, `VERSION_CODENAME=steam-machine`, `VARIANT`/`VARIANT_ID` Steamify with its version, in `/etc/os-release`; the pacman hook runs it again after cachyos-hooks (`fill SCRIPT=... VERSION=... STEAMOS=...`) |
 | `steamify-nvidia-initramfs.sh`, `steamify-nvidia-initramfs.hook` | `lib/nvidia.sh` (SteamOS conversion, NVIDIA fix) | The pacman hook (before the initramfs is built, after DKMS) and its script: the NVIDIA modules go into the initramfs only while every installed kernel has them, decided again at every kernel or driver change (`fill SCRIPT=...`) |
 | `cros-ec-cec-single-port.patch` | `lib/cec.sh` (HDMI-CEC) | Makes Valve's Steam Machine CEC driver find amdgpu's HDMI port |
+| `gamescope-gbm-scanout.patch` | `lib/nvidia.sh` (gamescope on NVIDIA) | gamescope 3.16.31 patch: scan-out buffers allocated with GBM (opt-in, `gamescope_drm_gbm_scanout=1`), which cures the corrupted picture on NVIDIA; from farnoy/gamescope, see the header of the file |

steamify.sh

@@ -15,11 +15,11 @@
 set -uo pipefail
 
 # Release version, see CHANGELOG.md.
-VERSION=2.11.0
+VERSION=2.11.2
 
 SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
 
-for lib in common state packages login-manager single-user steam-desktop steam-machine fremont-poweroff vram-booster hdmi-refresh nvidia controllers cec boot-session vapor-theme steamos-extras bios desktop-shortcut wizard-shortcut steam-game update-notifier first-login menu backend; do
+for lib in common state packages login-manager single-user steam-desktop steam-machine fremont-poweroff vram-booster hdmi-refresh nvidia gamescope-nvidia controllers cec boot-session vapor-theme steamos-extras bios desktop-shortcut wizard-shortcut steam-game update-notifier first-login menu backend; do
     # shellcheck source=/dev/null
     source "$SCRIPT_DIR/lib/$lib.sh"
 done

ui/qml/AppState.qml

@@ -78,14 +78,21 @@ Item {
         w[id] = !w[id];
         // The same rules as the terminal menu (toggle_component).
         var hasGaming = items.some(function (i) { return i.id === "gaming"; });
-        if (id === "gaming" && !w.gaming) { w.single = false; w.silent = false; w.glyphs = false; }
-        if (id === "single" && w.single && hasGaming) w.gaming = true;
+        var hasNvidia = items.some(function (i) { return i.id === "nvidia"; });
+        // Single user mode works without the conversion on NVIDIA PCs.
+        if (id === "gaming" && !w.gaming) { if (!hasNvidia) w.single = false; w.silent = false; w.glyphs = false; }
+        if (id === "single" && w.single && hasGaming && !hasNvidia) w.gaming = true;
         if (id === "nvidia") w.bigpicture = w.nvidia;
         if (id === "bigpicture" && w.bigpicture) { w.nvidia = true; w.nvsilent = false; }
         if (id === "nvsilent" && w.nvsilent) { w.nvidia = true; w.bigpicture = false; }
         if (id === "nvidia" && !w.nvidia) w.nvsilent = false;
         if (id === "silent" && w.silent) w.gaming = true;
         if (id === "glyphs" && w.glyphs) w.gaming = true;
+        // On NVIDIA the conversion and "Gaming on NVIDIA" exclude each other (both would start Steam at login).
+        if (hasGaming && hasNvidia) {
+            if (id === "nvidia" && w.nvidia) { w.gaming = false; w.silent = false; w.glyphs = false; }
+            else if ((id === "gaming" || id === "silent" || id === "glyphs") && w[id] && w.gaming) { w.nvidia = false; w.bigpicture = false; w.nvsilent = false; }
+        }
         if (id === "machine") w.poweroff = w.machine;
         if (id === "poweroff" && w.poweroff) w.machine = true;
         if (id === "machine" && !w.machine) w.kpin = false;