Merge pull request #18 from theupriser/fix/no-lock-before-restart

fix: No lock screen in single user mode before a restart

CHANGELOG.md

@@ -5,6 +5,23 @@ All notable changes, per version and per commit. Versions follow
 `steamify.sh`. Versions before 0.7.0 were numbered afterwards,
 one per merged pull request.
 
+## 1.1.4 - 2026-09-25
+
+- **fix: No lock screen in single user mode before a restart**
+  - The screen locker only read the new settings at the next login, so the
+    PC still locked after 5 minutes idle until then. Turning single user
+    mode on or off now tells it to reload them right away.
+
+## 1.1.3 - 2026-09-25
+
+- **fix: HDMI-CEC settings shown in Steam**
+  - CachyOS's gaming mode script sets `STEAM_ENABLE_CEC=0`, which hides
+    Steam's HDMI-CEC settings (and its CEC volume buttons). HDMI-CEC now adds
+    a drop-in for `steam-launcher.service` that overrides it with
+    `STEAM_ENABLE_CEC=1` (`/etc/steamify/steam-cec.env`).
+  - HDMI-CEC set up by 1.1.0-1.1.2 shows as off and ticked, so a normal run
+    (Enter) adds this.
+
 ## 1.1.2 - 2026-09-25
 
 - **fix: Steam's HDMI-CEC settings reach cecd on a first run**

TECHNICAL.md

@@ -192,6 +192,13 @@ devices found. Also turn on CEC on the TV
 `steamos-manager` writes cecd's settings from Steam's (wake the TV, put it to
 sleep), in `~/.config/cecd/config.d/`, and Steam shows its HDMI-CEC
 settings; the wizard restarts steamos-manager so that happens right away.
+CachyOS's gaming mode script (`/usr/lib/steamos/gamescope-session`) sets
+`STEAM_ENABLE_CEC=0`, which hides those settings; Steam reads the script's
+variables from `$XDG_RUNTIME_DIR/gamescope-environment`. HDMI-CEC adds a
+drop-in for `steam-launcher.service`
+(`/etc/systemd/user/steam-launcher.service.d/10-steamify-cec.conf`) with a
+second `EnvironmentFile=` (`/etc/steamify/steam-cec.env`,
+`STEAM_ENABLE_CEC=1`), which overrides it from the next gaming mode start.
 
 It's experimental: on SteamOS itself CEC can wake the Steam Machine right
 after it goes to sleep (Samsung TVs,

lib/cec.sh

@@ -11,6 +11,11 @@ CEC_PKGS=(cecd cec-audio-control inputattach-cec-units)
 # steamos-manager checks once, at its start, whether cecd runs; order it
 # after cecd so it never misses it at login.
 CEC_ORDER_DROPIN=/etc/systemd/user/steamos-manager.service.d/10-steamify-after-cecd.conf
+# CachyOS's gaming mode script exports STEAM_ENABLE_CEC=0, which hides
+# Steam's HDMI-CEC settings; Steam reads it from the gamescope environment
+# file. A later EnvironmentFile= overrides it.
+CEC_STEAM_ENV=/etc/steamify/steam-cec.env
+CEC_STEAM_DROPIN=/etc/systemd/user/steam-launcher.service.d/10-steamify-cec.conf
 
 cec_link_steamos_manager() {
     # On a Steam Machine: steamos-manager writes cecd's config from Steam's
@@ -27,7 +32,11 @@ cec_link_steamos_manager() {
     return 0
 }
 
-cec_status() { pacman -Q "${CEC_PKGS[@]}" >/dev/null 2>&1; }
+cec_installed() { pacman -Q "${CEC_PKGS[@]}" >/dev/null 2>&1; }
+# On = installed and Steam told to show its CEC settings. An install from
+# before 1.1.3 lacks the latter; the menu then ticks it (see cec_repair).
+cec_status() { cec_installed && [[ -f "$CEC_STEAM_DROPIN" ]]; }
+cec_repair() { cec_installed && ! cec_status; }
 
 fetch_holo_pkg() {
     # fetch_holo_pkg <dir> <package>: download the newest <package> from
@@ -77,11 +86,17 @@ cec_enable() {
     sudo mkdir -p "$(dirname "$CEC_ORDER_DROPIN")"
     printf '%s\n' "# Written by Steamify: steamos-manager only sees cecd if it runs at its start." \
         '[Unit]' 'After=cecd.service' | sudo tee "$CEC_ORDER_DROPIN" >/dev/null
+    sudo mkdir -p "$(dirname "$CEC_STEAM_ENV")" "$(dirname "$CEC_STEAM_DROPIN")"
+    printf '%s\n' "# Written by Steamify: Steam's HDMI-CEC settings in gaming mode." 'STEAM_ENABLE_CEC=1' |
+        sudo tee "$CEC_STEAM_ENV" >/dev/null
+    printf '%s\n' "# Written by Steamify: overrides STEAM_ENABLE_CEC=0 from the gaming mode script." \
+        '[Service]' "EnvironmentFile=-$CEC_STEAM_ENV" | sudo tee "$CEC_STEAM_DROPIN" >/dev/null
     systemctl --user daemon-reload
     cec_link_steamos_manager
     if compgen -G "/dev/cec*" >/dev/null; then
         systemctl --user restart cecd.service 2>/dev/null
-        ok "HDMI-CEC on ($(cd /dev && echo cec*)). Turn on CEC on your TV too (e.g. Sony: BRAVIA Sync, Samsung: Anynet+, LG: SimpLink)."
+        ok "HDMI-CEC on ($(cd /dev && echo cec*)); Steam shows its settings from the next gaming mode start."
+        info "Turn on CEC on your TV too (e.g. Sony: BRAVIA Sync, Samsung: Anynet+, LG: SimpLink)."
     else
         warn "No CEC device (/dev/cec*) found: your GPU may not support CEC. A USB CEC adapter"
         warn "(e.g. Pulse-Eight) works too. Check again after a restart with: ls /dev/cec*"
@@ -93,8 +108,8 @@ cec_disable() {
     systemctl --user disable --now cecd.service cec-audio-control.socket cec-audio-control.service 2>/dev/null
     systemctl --user disable steamos-manager-configure-cecd.service 2>/dev/null
     sudo pacman -Rns --noconfirm "${CEC_PKGS[@]}" 2>/dev/null
-    sudo rm -f "$CEC_ORDER_DROPIN"
-    sudo rmdir "$(dirname "$CEC_ORDER_DROPIN")" 2>/dev/null
+    sudo rm -f "$CEC_ORDER_DROPIN" "$CEC_STEAM_DROPIN" "$CEC_STEAM_ENV"
+    sudo rmdir "$(dirname "$CEC_ORDER_DROPIN")" "$(dirname "$CEC_STEAM_DROPIN")" "$(dirname "$CEC_STEAM_ENV")" 2>/dev/null
     systemctl --user daemon-reload
     if [[ -n "$(state_get cec installed_linuxconsole)" ]]; then
         sudo pacman -Rns --noconfirm linuxconsole 2>/dev/null

lib/menu.sh

@@ -67,6 +67,8 @@ detect_components() {
         if "${c}_status"; then CURRENT[$c]=1; any=true; else CURRENT[$c]=0; fi
         WANTED[$c]=${CURRENT[$c]}
     done
+    # HDMI-CEC set up by an older version: tick it, so a normal run fixes it.
+    component_available cec && cec_repair && WANTED[cec]=1
     # Shows the current and newest BIOS version.
     bios_available && { bios_lookup_newest; LABEL[bios]="$(bios_label)"; }
     # First run: preselect the full SteamOS experience (never an action).

lib/single-user.sh

@@ -81,6 +81,13 @@ single_wallet_disable() {
     ok "Your own wallet is back (the empty one is kept as kdewallet.kwl$WALLET_OURS)."
 }
 
+reload_screen_locker() {
+    # The screen locker only reads kscreenlockerrc when the session starts:
+    # without this it keeps locking after idling until the next login.
+    qdbus6 org.freedesktop.ScreenSaver /ScreenSaver org.kde.screensaver.configure >/dev/null 2>&1 ||
+        busctl --user call org.freedesktop.ScreenSaver /ScreenSaver org.kde.screensaver configure >/dev/null 2>&1 || true
+}
+
 single_launcher() {
     # Launcher: only Sleep / Restart / Shut Down, no Session dropdown (where
     # Log Out lives). Restricting action/logout instead would also hide
@@ -114,6 +121,7 @@ single_enable() {
     single_launcher
 
     restart_plasmashell_if_stopped
+    reload_screen_locker
     single_wallet_enable
     ok "Single user: no lock screen, user switching or log out."
 }
@@ -143,6 +151,7 @@ single_disable() {
         done
     fi
     restart_plasmashell_if_stopped
+    reload_screen_locker
     single_wallet_disable
     ok "KDE's normal lock screen and user switching are back."
 }

lib/steam-machine.sh

@@ -351,7 +351,7 @@ kernel_overview() {
         fi
         echo -e "  ${running}${line}"
     done
-    cec_status && { echo; echo -e "    $(cec_overview)"; }
+    cec_installed && { echo; echo -e "    $(cec_overview)"; }
     if [[ "$leds" == true ]]; then
         local loaded="$miss" nodes
         lsmod | grep -q '^leds_valve' && loaded="$mark"

steamify.sh

@@ -15,7 +15,7 @@
 set -uo pipefail
 
 # Release version, see CHANGELOG.md.
-VERSION=1.1.2
+VERSION=1.1.4
 
 SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"